Bergstrom DAF COOL ULTIMATE Montageanweisungen Seite 19

DAF COOL ULTIMATE
Remove any residue formed when removing
2
the hatch cover, and correct any damage to
the vehicle roof by applying anti-corrosion
paint. Allow the paint to dry properly before
assembling.
Use quick-drying anti-corrosion paint TRP
reference: 0908365 / 0908396 / 0908427.
Clean the area on the base of the unit shown
3
below, and apply Sika Aktivator 100 activator
(reference 1312362). Allow the activator to dry
before continuing to assemble.
Once the activator has dried, apply Sika
4
Primer 209D (reference 1240547) over the
area where it was applied.
19
EN