Explanation Of Symbols - Bergstrom DAF COOL ULTIMATE Montageanweisungen

DAF COOL ULTIMATE
EN
Thank you for placing your trust in our range of products.
DAF Cool Ultimate is an air conditioning unit designed
and manufactured by Dirna Bergstrom to run off a
stationary vehicle's engine during rest periods in the
shade and/or at night.
DAF Cool Ultimate is designed with cutting-edge
technology to achieve high performance, reduced fuel
consumption, and a lower level of CO
are the features that make it unique on the vehicle air
conditioning market.
Read this document carefully before
installing the product. Keep this document for
future reference. The original documentation
was written in Spanish, all other languages are
translations.
All product manuals are available in their digital
versions (PDF) at https://daf.dirna.com/
Select language and product.
All sales and warranty transactions are subject
to our general conditions of sale in their latest
version, published on our website https://
es.dirna.com/

Explanation of symbols

- Warning: A safety warning indicating a
!
situation which, if not avoided, could result in
death or serious injury.
- Danger: Cutting risk. Indicates a situation that
could lead to cutting.
- Danger: Risk of electrocution. Indicates a
situation that could lead to electrocution.
- Caution: Safety warning informing about a
situation, which if not avoided, could result in
damage to the unit or other materials.
- Information: Additional information on the
installation or handling of the product.
- Fragile: Indicates a situation in which care
must be taken to avoid damage to the unit and
other materials.
emissions. These
2
16
Explanation of liability
- Dirna Bergstrom accepts no responsibility for
damage caused in the following cases:
• Damage to the product due to mechanical
influences and surges.
• Modifications made to the unit without the
manufacturer's express consent.
• Use of the unit for purposes not described in
this document.
• Improper handling or installation of the unit.
- It is forbidden to tamper with the refrigerant
gas circuits without the manufacturer's express
authorisation.
- The system for fixing the equipment on the roof
of the truck has been selected and defined by
the vehicle manufacturer. It is important to carry
out the assembly following these instructions that
come from the vehicle manufacturer himself. The
installer is responsible for the assembly, Dirna
Bergstrom is not responsible for any failure that
may appear during the installation or as a result
of using the fixing system specified by the vehicle
manufacturer.
Warnings during assembly
!
- The installation, repair and maintenance of this
air conditioning unit may only be carried out by
technical staff with sufficient training in vehicle
air conditioning, possible dangers and applicable
standards.
- Read the installation instructions carefully before
starting to install the unit. During installation,
follow the instructions carefully.
- Switch off the ignition key before starting to install
the unit.
- Disconnect the vehicle's battery before starting to
install the unit.
- Install DAF Cool Ultimate securely to prevent it
from falling.
- Use the appropriate tools for each operation.
- During installation, ensure the connection of the
electrical components, checking that they are
fitted correctly.
- If during installation of the unit the cables pass
through walls with sharp edges, use conduits or
guides to prevent damage to the cables.
- If during installation the unit is tilted, or the cab
is tilted with the unit installed on top, you must