philrouge AIRTOUCH Bedienungsanleitung Seite 15

S A F E T Y I N S T R U C T I O N S
– Never open the device housing. Any and all warranty
claims shall expire if the housing is opened without
authorisation.
– Repairs may only be carried out by the manufacturer/
dealer.
– Do not allow fluids to penetrate the housing interior.
– If the cables or housing are damaged, do not operate
the radio unit and contact the manufacturer/dealer.
T E C H N I C A L S P E C I F I C A T I O N S
Operating voltage: 100 –240 volts / 15 volts DC
Final pressure of pump: max. 200 mbar
High quality HR foam mattress core
Polyurethane air hoses, with double ultrasound welding
Mattress cover made from breathable double jersey,
quilted either with pure new wool and silk or with washable
PES hollow fibre
28
G E N E R A L I N F O R M A T I O N
The Airtouch mattress is also suitable for motor­powered
bed frame inserts.
Care
If you selected the mattress with a washable cover, you can
wash the cover up to 60 ºC. The cover with pure new wool
and silk is suitable for dry cleaning.
Changes in reclining comfort
In the initial period after purchase, the reclining comfort
might change due to normal material expansion. Re­adjust
the reclining comfort according to your personal needs.
Changes in temperature or air pressure
In case of changes in temperature or air pressure, slight
changes in comfort are normal in the air bed. Re­adjust
the reclining comfort according to your personal needs.
Formation of depressions on the mattress
Because the individual mattress zones can be adjusted very
softly, optical formation of depressions is normal and does
not signify a loss of quality.
Disconnecting the power cord
If you do not want the mattress to be connected to the
mains, you can unplug the power cord after mattress
adjustment. If you would like to change the adjustment,
re­plug the power cord. The mattress adjustment can
immediately be changed again.
Attention: always position cables so that they do not pose
a tripping hazard.
E N
29