3. Safety
The following safety guidelines must be followed in order to avoid injury and damage to
surrounding objects or the Aerostat
Warning:
- Electrical installation must be carried out only by an electrically qualified person and in
accordance with national and local regulations.
- Do not use the Aerostat
®
- The Aerostat
XC is intended only for neutralizing static electricity.
- When working on the equipment, the power supply must be completely disconnected.
- The emitters are sharp and can cause injuries.
Danger:
- Ensure that the equipment is properly grounded. Grounding is necessary for proper and safe
operation and prevents electric shock if touched.
- Do not insert objects through the discharge grille.
This may result in live parts being touched.
- High voltage can be dangerous for people with pacemakers.
Note:
- The device loses its warranty if changes or adjustments etc. have been made without prior
written approval or if non-original parts are used during repair.
XC_UM_9752065910_NL_D_GB_FF_V1_1
®
XC itself.
®
XC in a fire and/or explosive environment.
24