Guide to preventive
maintenance and consumable
parts replacement cycles
Parts name
Remote controller
• This maintenance and replacement cycles indicate the approximate period for
maintenance activity that will promote the safe, long-term use of the product. As
such, it should be used to schedule appropriate maintenance.
• The maintenance and replacement cycles are different from the periods of guarantee.
• The table above applies to normal product use. If any of the items listed below apply,
it may be necessary to consider shortening the "maintenance cycle".
■If the product is used in a very hot or humid location, or in locations with extreme variations
in heat or humidity
■If the product is used in a location with severe power supply fluctuations (voltage, frequency,
waveform distortion, etc.)
■If the product is installed in a location subject to frequent vibrations or shocks
■If the product is used in an adverse environment, such as one exposed to dust, salinity, oil
mist or harmful gases such as hydrogen sulfide or sulfur dioxide.
44
Maintenance/Replacement cycle
10 years