Mitsubishi Electric PAR-W31MAA Anweisungshandbuch Seite 36

5
Unit1
Function setting
M-NET address
Function No.
Data
Function
F1
Unit1
Function setting
M-NET address
Function No.
Data
Function
6
Unit1
Function setting
M-NET address
Function No.
Data
Function
F1
36
FRI
Set / Conf
F2 F3 F4
FRI
Set / Conf
FRI
Set / Conf
F2 F3 F4
The Function setting screen will be displayed.
Press the [F1] or [F2] button to select the
connected unit "M-NET address", "Function
No." or "Data", and then press the [F3] or [F4]
button to change to the desired setting.
After changing to the desired setting, press the
[Select] button.
The setting data transmission screen will be
displayed.
To check the current settings, set the "M-NET
address" or "Function No." of the connected unit
to be checked, select "Conf" in "Function" and
press the [Select] button.
The screen indicating that the confirmation is
being processed will be displayed and the data
will be displayed when checking is completed.
Once data transmission is completed, the
screen indicating that the settings have been
made will be displayed.
To continue making settings, press the [Return]
button to return to the screen in procedure 3.
Use the same procedure to set other connected
unit and Data settings.
Navigating through the screens
■ To return to the Service menu ...... [Menu] button
■ To return to the previous screen ...... [Return] button