PLAYKIN BENTLEY Betriebsanleitung Seite 62

CONNECT THE STEERING WHEEL
NOTE: If your car's steering wheel is equipped with the sound function,
please follow steps 1~4 to add batteries (Not included).
1. Using a screwdriver, remove the battery
cover screw located in the center of the
steering wheel.
2. Remove the cover from the top of the
battery compartment.
3. Insert two AA batteries into the correct
polarity.
4. Place the battery cover over the battery
compartment and secure it with the screw
you removed in the first step.
Remove the M5x35 bolt and the Ø5 nut from the
handwheel.
5. Place the steering wheel on the steering
column, which protrudes from the centre
of the steering wheel base.
6. Align the holes on each side of the steering
wheel with the holes on the end of the
steering column.
7. Tighten a nut on the opposite end of the
bolt to secure the steering wheel to the
steering.
End of steering column
6
5
62
3
4 2
7
1