Preparation Work On The Vehicle - Abt AEC Montageanleitung

Mountinginstruction AEC for 2,0 BTD T6.1 EU6 AP

4 Preparation work on the vehicle

Note
© 2021 ABT Sportsline GmbH
Ensure that the vehicle is in sleep
mode (idle bus).
Positions of the sensors
A Rail sensor / rail pressure (red
arrow)
B Boost pressure sensor 2 /
Boost pressure 2 (green arrow)
C Hall sensor / camshaft position
(yellow arrow)
D Air mass meter (yellow arrow)
Loosen intercooler in
accordance with ELSA
regulations and place it to one
side (water hoses must not be
loosened).
page 7/15