Scheppach PM1600 Original Bedienungsanleitung Seite 20

4. Power tool use and care
a) Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed.
b) Do not use the power tool if the switch does
not turn it on and off. Any power tool that can-
not be controlled with the switch is dangerous and
must be repaired.
Disconnect the plug from the power source
c)
and/or remove the battery pack, if detachable,
from the power tool before making any adjust-
ments, changing accessories, or storing pow-
er tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of chil-
dren and do not allow persons unfamiliar with
the power tool or these instructions to operate
the power tool. Power tools are dangerous in the
hands of untrained users.
Maintain power tools and accessories. Check
e)
for misalignment or binding of moving parts,
breakage of parts and any other condition that
may affect the power tool's operation. If dam-
aged, have the power tool repaired before use.
Many accidents are caused by poorly maintained
power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the power
tool for operations different from those intended
could result in a hazardous situation.
h) Keep handles and grasping surfaces dry,
clean and free from oil and grease. Slippery
handles and grasping surfaces do not allow for
safe handling and control of the tool in unexpected
situations.
5. Service
Have your power tool serviced by a qualified
a)
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
20 | GB
m WARNING!
This power tool generates an electromagnetic field dur-
ing operation. This field can impair active or passive
medical implants under certain conditions. In order to
prevent the risk of serious or deadly injuries, we recom-
mend that persons with medical implants consult with
their physician and the manufacturer of the medical im-
plant prior to operating the machine.
Mixer safety instructions
a) Always hold the power tool with both hands on
the intended handles. Loss of control can cause
personal injury.
b) Ensure sufficient ventilation when mixing
flammable materials to avoid a hazardous at-
mosphere. Developing vapour may be inhaled or
be ignited by the sparks the power tool produces.
c) Do not mix food. Power tools and their accesso-
ries are not designed for processing food.
d) Keep the cord away from the working area. The
cord may be entangled by the stirrer.
e) Ensure that the mixing container is placed in a
firm and secure position. A container that is not
properly secured may move unexpectedly.
f) Ensure that no liquid splashes against the
housing of the power tool. Liquid that has pene-
trated the power tool can cause damage and lead
to electric shock.
g) Follow the instructions and warnings for the
material to be mixed. Material to be mixed may
be harmful.
h) If the power tool falls into the material to be
mixed, unplug the power tool immediately and
have the power tool checked by a qualified repair
person. Reaching into the mixing container with the
power tool still plugged in can lead to electric shock.
i) Do not reach into the mixing container with
your hands or insert any other objects into it
while mixing. Contact with the stirrer may lead to
serious personal injury.
Start up and run down the power tool in the
j)
mixing container only. The stirrer may bend or
spin in an uncontrolled manner.
Residual risks
Even when this power tool is operated properly,
residual risks still remain. The following hazards
may arise in connection with the design and con-
struction of this power tool:
• Lung damage if suitable dust protection mask is not
worn.
www.scheppach.com