Operation With Mult Imaus; Care Instructions - roco smartRail Handbuch

smartRail
Operation with multiMAUS
6. Operation with
If you already own a digital ROCO or Fleischmann model train, you can alternatively operate your locomoti-
ves on smartRail with your familiar
The MAUS is simply connected to the X-BUS socket on the bottom of the smartRail.
multi
The multi MAUS can be used to access all functions, programming tools and libraries with smartRail, that
are available on your system. Here, smartRail is the main track as well as the programming track.
For details on how to operate the
40
MAUS
multi
MAUS.
multi
is the main track as well as the programming track.
multi multi MAUS, please refer to its operating manual. MAUS, please refer to its operating manual.

7. Care instructions

• Care of the wooden parts
If necessary, clean the wooden parts with a damp cloth. Please use only water and do not use any additional
cleaning or care products.
• Care of the black Plexiglas
Always use a dry cloth to clean the black Plexiglas, because the Plexiglas rests next to the
smartRail track –- which should never get wet.
• Care of the sensors
Ensure that the sensors are always dust-free! For cleaning only use guaranteed scratch-free cloths – e.g.
those for cleaning glasses.
• Care of the track
Oil the track lightly and carefully if necessary with the ROCO oiler (art. no. 10906).
Care instructions
41