Cleaning And Maintenance - IKEA LAGAN AA-2346504-1 Bedienungsanleitung

ENGLISH
The accessories for wall mounting are not
included because walls made of different
materials require different types of
accessories. Use fastening systems
suitable for the walls in your home and
Environmental protection advice
The packaging material
The packaging is 100% recyclable and it is
marked with the recycling symbol
The different parts of the packaging must
not be dispersed into the environment;
they must be disposed of in accordance
with the regulations set out by the local
authorities.

Cleaning and maintenance

WARNING
• Disconnect the hood from the electrical
power supply
• Clean the surfaces using a damp cloth. If
very dirty, add a few drops of dishwash-
ing liquid to the water. Dry with a dry
cloth.
• Do not use tools or other cleaning in-
struments.
• Avoid using steam jet cleaners
IMPORTANT: do not use corrosive or
abrasive detergents. If one of these
products were to accidentally come into
contact with the appliance, clean it
immediately with a damp cloth.
Use specific detergents to clean the
appliance and follow the manufacturer's
instructions.
Do not use abrasive sponges, scourging
pads or metal scrapers. In the long run,
they may damage the surface
IMPORTANT: clean the grease filters at
least once a month to remove any oil or
grease residues.
Washing the grease filter
The metal grease filter has an unlimited
service life and must be washed once a
month by hand or in the dishwasher at low
temperatures on a short program.
appropriate for the weight of the
appliance. For further details, contact a
specialist dealer.
Keep these instructions for future
reference.
The symbol on the product or
documentation provided indicates that
this product must not be treated as
domestic waste, but must be taken to a
suitable waste collection site for the
recycling of electrical and electronic
appliances.
If washed in the dishwasher, the grease
filter may become slightly discoloured, but
its filtering properties will not change.
Carbon filter maintenance.
The anti-odour filter must be washed and
regenerated every 3-4 months (or more
frequently if the hood is subjected to
intensive use), up to a maximum of 8
regeneration cycles (in case of particularly
intense use, it is advisable not to exceed 5
cycles).
Regeneration procedure
• Wash in the dishwasher at a maximum
temperature of 70°C or by hand in warm
water without using abrasive sponges
(do not use detergents!)
• Dry in the oven at a maximum temperat-
ure of 70°C for 2 hours, or leave it to dry
at room temperature, placing the filter
in an upright position to facilitate water
drainage.
Light bulb maintenance
• Open the intake grille or remove the self-
bearing grease filter.
• Replace the damaged light bulb. Use
only E14 light bulbs, max 3W.
• Refit the intake grille or the grease filter.
IMPORTANT: use gloves when replacing
the light bulb
10