E-Supervisor Ecosmart Heat Pump Block Manager; Main Screen Guide; User Menu Guide; On/Off Menu - ECOFOREST e-SUPERVISOR Benutzerhandbuch

5. e-SUPERVISOR ecoSMART heat pump block manager

5.1. Main screen guide

The main screen of the application contains a series of fields with information about heat pump block manager e-SUPERVISOR
operation.
Status
Operation program

5.2. USER menu guide

To access the USER menu, press
OPERATING PROGRAM, adjust comfort parameters and display the desired information. The following table displays the structure of
the USER menu.
1. On/Off
2. Programming
3. Heating
4. Cooling
5. DHW / Legionella
6. Pool
7. e-Manager
8. Information
9. Alarms

5.2.1. ON/OFF Menu

4:5 User menu /8
On/Off
Schedule
Heating
/9 On/Off
Unit address:
State:
program:
// Fri
7
Active components
Figure 5.1. Description of the main screen.
. Each menu contains a series of screens that allow you to modify the e-SUPERVISOR STATUS and
USER menu
Sub-menu level 1
Table 5.1. USER menu structure.
On/Off
5
Displays the direction of the unit.
Used to turn the equipment on/off or to activate the EMERGENCY status.
Also used to choose the operation program.
e-SUPERVISOR ecoSMART heat pump block manager
Date and time
4:5
5
Sub-menu level 2
2.1. Date/Time
2.2 Schedule
2.3. Weekly schedule
2.4. Tariff control
29
Control applications manual
Energy meter
Operation mode