Geutebruck G-ST 2000+ Bedienungsanleitung Seite 51

G-ST 2000+
Resetting the system to factory settings
Recovery DVDs are provided with your G-ST. This allows for the recovery of the software in-
stalled at delivery as well as the original settings.
Please note that the recovery process should only be carried out by qualified personnel, as all
data on the C drive will be overwritten!
Back up your settings on an external disk beforehand.
The recovery image on the DVD is matched to your original hardware (CPU, Windows li-
censes). Subsequent hardware changes (such as CPU) are not compatible with this recovery
image.
If you cannot access the Windows desktop or programs due to system problems, you can still
start the recovery process.
To restore the device to factory settings, for example, after a crash, please proceed as follows:
1. Connect the DVD drive to a USB socket in the machine according to the instructions pro-
vided by the manufacturer.
2. Switch the device on and place the recovery DVD in the DVD-ROM drive.
3. Now boot your G-ST from the recovery DVD, press a key (F11, F12...) to open the Bios
boot menu and select the appropriate boot device.
4. In the Windows RE Tools menus, select a keyboard layout, e.g., US.
5. In the next menu, click on the Troubleshoot menu item.
22
Back to the
table of contents
~
V 1.0