General Safety Instructions - Geutebruck G-ST 2000+ Bedienungsanleitung

G-ST 2000+

General safety instructions

When using the device or performing maintenance on it, the following safety instruc-
tions are to be observed to protect the operator, the service technician and the de-
vice:


Nonetheless, we are obligated to describe these safety instructions so that the resid-
ual dangers can be eliminated.
Warning!
When electric machines are used, fundamental safety precautions must be observed
to eliminate the risk of fire, electric shock and injury to persons. For this reason,
please read these operating instructions before starting your work. Store these in-
structions in a place where the qualified personnel and user can access them quickly
and
When operating the device, the locally applicable laws, regulations and standards
must be observed. In the interest of safety, the operating company and supervisors
are responsible for compliance.
Whenever performing any kind of work, check for any possible damage.
All parts must be mounted correctly and all conditions fulfilled to ensure proper func-
tioning. If the device is damaged in any way, it may no longer be used. Ensure that
the device is repaired properly. Mark the defect clearly and pull the power plug so
that no accidents or damage can occur before the device is repaired.
Do not use the power line for uses for which it is not intended. Protect the cable from
heat, oil and sharp edges.
In dangerous situations or technical malfunctions, immediately disconnect the device
from the power
Warning of electric
In case of damage, the device may no longer be used. Disconnect the device from
the power
Warning!
For all repair and maintenance work, the device must be disconnected from the
power supply. Work on electrical equipment may only be performed by qualified
electricians.
Only use original spare parts. Otherwise accidents can occur for the
Warning!
There is a risk of explosion if an unsuitable type of battery is used instead of the
mainboard battery. Only dispose of in accordance with applicable legal requirements
and local regulations.
4
During design and construction of the device, the acknowledged state-of-the-art
as well as the acknowledged applicable standards and directives have been
taken into account and implemented.
Additionally, the device has been designed and developed so that the danger
that occurs during intended use has been eliminated to the greatest possible ex-
tent.
easily.
supply.
energy!!
supply!
Back to the
table of contents
~
user.
V 1.0