Preliminary Information - elc AL 924A Bedienungshandbuch

TABLE OF CONTENTS
1

PRELIMINARY INFORMATION

2 DESCRIPTION
2.1 INTRODUCTION
2.2 TECHNICAL SPECIFICATIONS
2.3 ACCESSORIES OF THE INSTRUMENT
2.4 OTHER SPECIFICATIONS
3 WORKING PRINCIPLE
4 PRELIMINARY INSTRUCTIONS
4.1 PACKAGING
4.2 MOUNTING AND PLACING OF THE INSTRUMENT
5 BEFORE USE
6 INSTRUCTIONS FOR USE
6.1 SAFETY INSTRUCTIONS
6.2 CONTROLS
6.3 BEFORE MEASURING
6.4 APPLICATIONS
7 MAINTENANCE
8 AFTER SALES SERVICE
9 DECLARATION OF CONFORMITY
TABLE OF CONTENTS
1 PRELIMINARY INFORMATION
2 DESCRIPTION
2.1 INTRODUCTION
2.2 TECHNICAL SPECIFICATIONS
2.3 ACCESSORIES OF THE INSTRUMENT
2.4 OTHER SPECIFICATIONS
3 WORKING PRINCIPLE
4 PRELIMINARY INSTRUCTIONS
4.1 PACKAGING
4.2 MOUNTING AND PLACING OF THE INSTRUMENT
5 BEFORE USE
6 INSTRUCTIONS FOR USE
6.1 SAFETY INSTRUCTIONS
6.2 CONTROLS
6.3 BEFORE MEASURING
6.4 APPLICATIONS
7 MAINTENANCE
8 AFTER SALES SERVICE
9 DECLARATION OF CONFORMITY
1. PRELIMINARY INFORMATION
Manufacturer : elc 59 avenue des Romains 74000 ANNECY - FRANCE
Phone : 04 50 57 30 46
Instrument : STABILIZED POWER-SUPPLY
Trademark : elc
Type : AL 924A
Page 7
2. DESCRIPTION
Page 7
Page 7
2.1 INTRODUCTION
Page 8
You just bought the POWER SUPPLY Type elc AL 924A. We thank you and
Page 8
congratulate you for your good choice.
The elc company proposes a wide range of POWER SUPPLIES and many other
Page 8
electronic test instruments : LF
M ...
ETERS
Page 8
Page 8
This instrument has been conceived according to the European standard
Page 8
EN 61010-1 and supplied in good condition. This instructions manual contains
information and notes, which must be respected by the purchaser, to ensure a safe
Page 8
working and to maintain the instrument in good condition.
Page 8
This practical instrument, to be used in laboratory, will give you satisfaction in all uses.
Page 8
Page 9
2.2 TECHNICAL SPECIFICATIONS AT 25°C
Page 9
Page 10
VOLTAGE
Page 10
Regulation
Page 10
Internal resistance : < 4mΩ
Page 10
Ripple
Display
Resolution
CURRENT
Regulation
Ripple
- 7 -
1. PRELIMINARY INFORMATION
Manufacturer : elc 59 avenue des Romains 74000 ANNECY - FRANCE
Phone : 04 50 57 30 46
Instrument : STABILIZED POWER-SUPPLY
Trademark : elc
Type : AL 924A
Page 7
2. DESCRIPTION
Page 7
Page 7
2.1 INTRODUCTION
Page 8
You just bought the POWER SUPPLY Type elc AL 924A. We thank you and
Page 8
congratulate you for your good choice.
The elc company proposes a wide range of POWER SUPPLIES and many other
Page 8
electronic test instruments : LF
M ...
ETERS
Page 8
Page 8
This instrument has been conceived according to the European standard
Page 8
EN 61010-1 and supplied in good condition. This instructions manual contains
information and notes, which must be respected by the purchaser, to ensure a safe
Page 8
working and to maintain the instrument in good condition.
Page 8
This practical instrument, to be used in laboratory, will give you satisfaction in all uses.
Page 8
Page 9
2.2 TECHNICAL SPECIFICATIONS AT 25°C
Page 9
Page 10
VOLTAGE
Page 10
Regulation
Page 10
Internal resistance : < 4mΩ
Page 10
Ripple
Display
Resolution
CURRENT
Regulation
Ripple
- 7 -
Fax : 04 50 57 45 19
F G
AND UNCTION ENERATORS
: adjustable from 0 (± 3mV) to 30V
fine setting (about 2.5V)
floating outputs
: < 40mV for a load variation from 0 to 100%
< 25mV for a mains variation from -5% to +5%
: < 5mV peak to peak or 1.8mV rms
: green Led for the voltage regulation
digital voltmeter with 3 digits of 14mm
: 100mV
: two ranges : adjustable from 0 to 1A
adjustable from 0 to 10A
Automatic operating at constant current
: < 20mA according to the load
< 50mA for a mains variation from -10% to +5%
: < 10mA
Fax : 04 50 57 45 19
F G
AND UNCTION ENERATORS
: adjustable from 0 (± 3mV) to 30V
fine setting (about 2.5V)
floating outputs
: < 40mV for a load variation from 0 to 100%
< 25mV for a mains variation from -5% to +5%
: < 5mV peak to peak or 1.8mV rms
: green Led for the voltage regulation
digital voltmeter with 3 digits of 14mm
: 100mV
: two ranges : adjustable from 0 to 1A
adjustable from 0 to 10A
Automatic operating at constant current
: < 20mA according to the load
< 50mA for a mains variation from -10% to +5%
: < 10mA
, F , P
REQUENCYMETER ANEL
, F , P
REQUENCYMETER ANEL