Declaration Of Conformity - elc AL 924A Bedienungshandbuch

6.4 APPLICATIONS
As outputs are floating, limited by the maximum common voltage, the reference is
given by the mounting diagram (Fig. 2).
The power supply can deliver a positive or negative voltage.
7. MAINTENANCE
No particular maintenance is required for this instrument.
Avoid dust, moisture, shocks ; your instrument will be grateful for that.
For the cleaning, please use a smooth duster.
If indicators do not light up on switching on, check :
- That the «ON/OFF» switch is pressed
- The mains voltage
- The connection to mains
- The protective fuse.
8. AFTER SALES SERVICE
The after sales Service is ensured by the elc company.
During two years, spare parts and workmanship are guaranteed. This guarantee does
not apply to instruments presenting defects or failures caused by an improper use
(wrong mains voltage, shocks ...) or which have been repaired outside our factory or
the repair shops of our authorized agencies.
6.4 APPLICATIONS
As outputs are floating, limited by the maximum common voltage, the reference is
given by the mounting diagram (Fig. 2).
The power supply can deliver a positive or negative voltage.
7. MAINTENANCE
No particular maintenance is required for this instrument.
Avoid dust, moisture, shocks ; your instrument will be grateful for that.
For the cleaning, please use a smooth duster.
If indicators do not light up on switching on, check :
- That the «ON/OFF» switch is pressed
- The mains voltage
- The connection to mains
- The protective fuse.
8. AFTER SALES SERVICE
The after sales Service is ensured by the elc company.
During two years, spare parts and workmanship are guaranteed. This guarantee does
not apply to instruments presenting defects or failures caused by an improper use
(wrong mains voltage, shocks ...) or which have been repaired outside our factory
or the repair shops of our authorized agencies.
Fig.2
Fig.2

9. DECLARATION OF CONFORMITY

Manufacturer : elc
Address : 59 avenue des Romains 74000 Annecy France
hereby certifies that the following product
Name : DC POWER SUPPLY
Type : AL 924A
conformable to the requirements of the directives :
- Low voltage 2014/35/UE
- Electromagnetic Compatibility 2014/30/UE
- RoHs 2011/65/UE
The following harmonized standards have been applied :
Safety : EN 61010-1:2010
EMC : EN 61326-1:2013
Annecy, on May 30, 2016
H. CURRI Manager
ELIMINATION OF MANUFACTURING WASTES BY THE PRIVATE
USERS IN THE EU
This symbol written in the product or in its packaging indicates
that this product must not be throw in the garbage with your other
waste.
Its your responsability to rid of your manufacturing wastes
bringing it to a specialized sorting office for the recycling of
electrical and electronic instruments.
Collection and recycling separated of your wastes will contribute
to preserve natural resources and guarantee a recycling
respectful of the Environment and human health.
For further information concerning the recycling center near your place of residence,
contact your town hall, the elimination service of garbage heap or the store where
you bought the instrument.
- 10 -
9. DECLARATION OF CONFORMITY
Manufacturer : elc
Address : 59 avenue des Romains 74000 Annecy France
hereby certifies that the following product
Name : DC POWER SUPPLY
Type : AL 924A
conformable to the requirements of the directives :
- Low voltage 2014/35/UE
- Electromagnetic Compatibility 2014/30/UE
- RoHs 2011/65/UE
The following harmonized standards have been applied :
Safety : EN 61010-1:2010
EMC : EN 61326-1:2013
Annecy, on May 30, 2016
H. CURRI Manager
ELIMINATION OF MANUFACTURING WASTES BY THE PRIVATE
USERS IN THE EU
This symbol written in the product or in its packaging indicates
that this product must not be throw in the garbage with your other
waste.
Its your responsability to rid of your manufacturing wastes
bringing it to a specialized sorting office for the recycling of
electrical and electronic instruments.
Collection and recycling separated of your wastes will contribute
to preserve natural resources and guarantee a recycling
respectful of the Environment and human health.
For further information concerning the recycling center near your place of residence,
contact your town hall, the elimination service of garbage heap or the store where
you bought the instrument.
- 10 -