Connect the load on the sockets [5].
Control the voltage regulation by the enlightened green LED and the current consumed by the display [4].
Constant current use
Adjust voltage to max or to a max desired value by [8] [9].
Select the desired current range by [7] : 25 mA, 250 mA or 2,5 A.
Do a short circuit on the sockets [5] and adjust the current to desired value by [6] on the display [4].
Take off the short-circuit and connect the load on sockets [5].
Control the current regulation by the enlightened red LED and its value on the display [4].
5.2.3 Precautions
Always adjust the power supply before connecting the load.
Connect the load with sufficient diameter (1mm²) insulated cord.
Disconnect the load before switching off the ALR3002M.
Avoid dust for the storage of the instrument.
A temperature control circuit controls the fan, it works only when necessary.
6 - MAINTENANCE
No particular maintenance is required for this instrument. Avoid dust, humidity, shocks : your instrument will
be grateful to you for that. For cleaning, please use a smooth duster :
If indicator does not light up when plugging, check :
- if ON/OFF switch is activated
- the connection to the main input voltage
- Main voltage presence
7 - AFTER SALES SERVICE
During TWO YEARS, spare parts and workmanship are guaranteed. This guarantee does not apply to instrument
presenting defects or failures caused by an improper use. Return expenses are borne by the client. Only devices returned
with a dated purchasing invoice can be recovered by the guarantee. Any intervention carried out by unauthorized persons
or organizations, shall void the guarantee.
8 - EU DECLARATION OF CONFORMITY
Manufacturer : ELC
Address
: 59, avenue des Romains 74000 Annecy FRANCE
declares the product
Name
: REGULATED POWER SUPPLY
Type
: ALR3002M
conformable to the requirements of the directives :
Low voltage 2014/35/UE, Electromagnetic Compatibility 2014/30/UE and RoHs 2011/65/UE.
The following harmonized standards have been applied :
Safety : EN 61010-1:2010
EMC : EN 61326-1:2013
Annecy, on January 04, 2022
ELIMINATION OF MANUFACTURING WASTES BY THE PRIVATE USERS IN THE EU
This symbol written in the product or in its packaging indicates that this product must not
be throw in the garbage with your other waste.
Its your responsability to rid of your manufacturing wastes bringing it to a specialized sorting
office for the recycling of electrical and electronic instruments.
Collection and recycling separated of your wastes will contribute to preserve natural
resources and guarantee a recycling respectful of the Environment and human health.
For further information concerning the recycling center near your place of residence, contact
your town hall, the elimination service of garbage heap or the store where you bought the
instrument.
H. CURRI Manager
- 10 -