Inhaltsverzeichnis
Werbung
13. TECHNISCHE DATEN
AD/DA 24 bits converter 96kHz (default), 88.2kHz, 48kHz, 44.1kHz selectable.
32/64bits DSP engine.
Frequency response -1dB (-3dB):
Line:10Hz – (30kHz)
Micro: 10Hz – (28kHz)
Phono: RIAA ± 0.5dB (20Hz – 20kHz)
Input sensitivity/Impedance:
Line: 0dBV/20kΩ
Phono:-40dBV/50kΩ
Micro: -50 to -30dBV / >1kΩ
Output level/Min. Load:
OUT1: 0dBV(+3, +6 dBV soft configurable) / 600Ω
OUT2: 0dBV(+3, +6 dBV soft configurable) / 600Ω
Output Limiter on OUT1 or OUT2: -10dBV to +10dBV 3 band compressor.
REC: 0dBV/10kΩ, MIX or PFL routed via software.
Headphones: 0,2W/200Ω, 1%THD
Midi: IEEE1394 / Din 5 180º
THD+N:
Line:<0,006%
Phono:<0,01%
Micro:<0,01%
Signal/N. Ratio:
Line:>100dB
Phono:>96dB
Micro:>95dB
CMRR: Micro:>70dB@1kHz
Talkover:
Attenuation: -6 to –30 dB (soft config.)
Release time: 0.5 to 3 sec. (soft config.)
Micro. Noise Gate: -80dB to 0dB
Micro. Compressor: 0 to 100% efficiency
Xfader cutting time soft adjust: from –1mm to 8mm., left & right independently.
Shape: Soft adjustable on Xfader, Faders & Dry-Wet.
BPM: automatic from 60 to 220 bpm in 6 ranges, internal or MIDI clock reference.
Firewire input routing levels: from -18 to 0 dB.
Firewire output routing levels: from 0 to +18 dB.
34
Werbung
Inhaltsverzeichnis
