Remote Sensor; Getting Started; Set Up Remote Sensor; Sensor Data Transmission - Oregon Scientific WMH601 Bedienungsanleitung

8. RESET: Reset unit to default settings
9. ºC / ºF: Temperature unit

REMOTE SENSOR

1
1. LED status indicator
2. Wall mount hole
3. Battery compartment
4. RESET hole
NOTE The sensor included in this package
(THN132NS) does not measure humidity.
2
4
3

GETTING STARTED

SET UP REMOTE SENSOR

1. Slide open the battery door.
2. Insert battery, matching the polarities (+ / -).
3. Press RESET.
4. Close the battery door.
TIP Use alkaline batteries for longer usage and consumer
grade lithium batteries in temperatures below freezing.

SENSOR DATA TRANSMISSION

To search for a sensor:
Press and hold UP and DOWN.
For best results:
Place the sensor within 100 m (300 ft) of the main unit.
•
Position the sensor so that it faces the main unit,
•
minimizing obstructions such as doors, walls and furniture.
Place the sensor out of direct sunlight and moisture.
•
Place the sensor in a location with a clear view to
•
the sky, away from metallic / electronic objects.
Position the sensor close to the main unit during cold
•
winter months as below-freezing temperatures may
affect battery performance and signal transmission.
4