Remote Sensor; Getting Started; Set Up Remote Sensor; Sensor Data Transmission - Oregon Scientific WMH90 Bedienungsanleitung

REMOTE SENSOR

1
1. LED status indicator
2. Wall mount hole
3. Battery compartment
4. RESET hole
5. CHANNEL switch

GETTING STARTED

SET UP REMOTE SENSOR

1. Slide open the battery door.
2. Insert battery, matching the polarities (+ / -).
3. Select channel then press RESET.
4. Close the battery door.
2
4
3
5
TIP Use alkaline batteries for longer usage and
consumer grade lithium batteries in temperatures below
freezing.

SENSOR DATA TRANSMISSION

To search for a sensor:
Press and hold and
For best results:
Place the sensor within 100 m (300 ft) of the main
•
unit.
Position the sensor so that it faces the main unit,
•
minimizing obstructions such as doors, walls and
furniture.
Place the sensor out of direct sunlight and
•
moisture.
Place the sensor in a location with a clear view to
•
the sky, away from metallic / electronic objects.
Position the sensor close to the main unit during cold
•
winter months as below-freezing temperatures may
affect battery performance and signal transmission.
4
.