Cleaning The Condenser; Technical Specifications - Polar UA022 Bedienungsanleitung

Condensation will form in refrigeration with frequent opening of the doors and on hot humid
days, please ensure condensation is allowed to drain properly or is wiped dry.

Cleaning the Condenser

Periodically cleaning the condenser can extend the life of the appliance.
Note: Use a soft brush or vacuum cleaner to clean the fins of the condenser,
taking care not to damage the fins.
Troubleshooting
A qualified technician must carry out repairs if required.
Fault
The appliance is not
working
The appliance turns on,
but the temperature is
too high/low
The appliance is
unusually loud

Technical Specifications

Model Voltage
UA022 220-240V~
50Hz
UA022_ML_A5_v1_20220425.indb 5 UA022_ML_A5_v1_20220425.indb 5
Probable Cause
The unit is not switched on
Plug or lead is damaged
Fuse in the plug has blown
Mains power supply fault
Condenser blocked with dust
Doors/drawers are not shut
properly
Appliance is located near a
heat source or air flow to the
condenser is being interrupted
Ambient temperature is too high
Insufficient airflow to the fans
Appliance is overloaded
The appliance is touching a
neighbouring object
The appliance has not been
installed in a level or stable position
Temperature
Power Current
Range
320W 1.6A 0°C - 10°C
Solution
Check the unit is plugged in correctly and
switched on
Replace plug or lead
Replace the fuse
Check mains power supply
Clean Condenser
Check doors / drawers are shut and seals
are not damaged
Move the appliance to a more suitable
location
Increase ventilation or move appliance to a
cooler position
Remove any blockages to the fans
Reduce the amount stored in the appliance
Check installation position and change if
necessary
Check installation position and change if
necessary
Dimensions
Refrigerant
H x W x D mm
R600a 90g 860 x 2002 x
535
EN
Weight
(kg)
125
5
2022/4/25 09:55 2022/4/25 09:55