Maintenance And Cleaning - D+H WRZ-Serie Originalbetriebsanleitung

WARNING
Read all safety warnings, instructions, illustrations
and specifications provided with this product.
Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
Safety notes
Operating voltage 230 VAC!
Risk of injury from electric shock!
Connection has to be carried out only by an
authorized electrical specialist!
- Lay and insert weak current conductions
separately from supply mains
- Only for inside mounting
- Just use unchanged original D+H parts

Maintenance and cleaning

Maintenance work is only allowed when the device is in
a de-energized condition! Inspection and maintenance
has to be carried out according to D+H maintenance
notes. Only original D+H spare parts may be used.
Repair is to be carried out exclusively by D+H.
Wipe away debris or contamination with a dry, soft
cloth.
Do not use cleaning agents or solvents.
Disposal
Electrical devices, accessories, batteries and packa-
ging should be sorted for environmental-friendly
recycling. Do not dispose electrical devices and
batteries into household waste!
Only for EC countries:
According the European Guideline 2012/19/EU for
waste electrical and electronic equipment and its
implementation into national right, electrcal devices
that are no longer usable must be collected separa-
tely and disposed of in an environmentally correct
manner.
99.820.19 3.5/10/22
Intended use
- Ventilation control for small sized building objects
- For triggering of 230 V AC ventilation drives
- Connection of up to 8 D+H drives
- 1 ventilation group
- Possibility of connecting up to 20 groups via
cutoff relays TRL 8 at 24 V DC output
- Weather monitoring (central CLOSE) in
conjunction with several TRL 8
- Only for inside mounting
Performance features
- LED-displays for wind and rain, exceeding of
wind threshold value and automatic operated
ON/OFF
- Wind switching threshold adjustable at the wind/
rain sensor WRS-S between 2 and 30 m/s via
DIP switches, wind signal is stored for approx. 5
minutes
- Only buttons with mutual interlocked NOC's
must be used with vent buttons by customer
Declaration of Conformity
We declare under our sole responsibility that the
product described under "Technical Data" is in
conformity with the following
2014/30/EU, 2014/35/EU, 2011/65/EU
S.I. 2016/1091, S.I. 2016/1011, S.I. 2012/3032
Technical file at:
D+H Mechatronic AG, D-22949 Ammersbek
Dirk Dingfelder
CEO
01.03.2022
English
regulations :
Maik Schmees
CTO
WRZ
7/12