i-tec CANANOTDOCKPD Gebrauchsanweisung Seite 11

Download the drivers from our website www.i-tec.cz under the "Download" tab for
this product and start the installation:
Extract the file to your MacBook desktop as a virtual disk, select "Drivers" and then
"DisplayLink Software Installer". Then select the installation language and follow the
on-screen instructions, entering the user password if necessary. The screen may
flicker during driver installation, this is a standard process. When the installation is
complete, restart your MacBook.
HARDWARE INSTALLATION
(CONNECTING THE DOCKING STATION TO THE MACBOOK)
1) Turn on your laptop/tablet and connect the power adapter to the docking
station.
2) Plug the dock's power adapter into a 110V/230V AC power outlet - (Only if you
have a USB-C adapter. The dock does not come with a USB-C adapter.)
3) Plug the USB-C connector into the USB-C port on your laptop/tablet. Use a
USB-C to USB-A adapter to plug into the USB-A port of your laptop/tablet.
4) The automatic installation of the ports will then begin.
5) After the installation is complete, restart your MacBook.
The installed ports are shown in Mac OS X as "USB-C Triple-4K Dock" in "About
This Mac"  "System Profiler"  "Hardware"  "USB".
Installing Drivers in Mac OS X
Viewing the dock on macOS
Quick Start / CANANOTDOCKPD/ English
EN | 11