EN
USE
The product is intended for drilling in wood
and metal, and for percussion drilling in
concrete and masonry. Use the power tool,
accessories and bits etc., in accordance with
these instructions, taking into account the
actual working conditions and the work that
is to be done. All other use is considered to be
unsuitable.
•
Before working on walls, ceilings or floors,
use a suitable detector to determine if
there are any pipes or cables concealed in
the work area.
•
Always pull out the plug before replacing
bits.
•
Always put the chuck key in its holder on
the power cord.
•
Secure the workpiece with clips, clamps or
the equivalent.
•
Do not press so hard on the drill that the
speed of the motor drops off.
20