20. Please keep the fireplace and wiring dry when transporting or storing them (remove the water
before moving the fireplace). Avoid strenuous vibration to prevent damage to the fireplace.
21. In order to avoid overheating, do not cover the heater.
22. The heater must not be located immediately below a socket-outlet.
23. When you are not using the unit for a longer period of time or if you want to transport please
empty the container.
INSTALLATION
This section is the guidance for electric fireplace installation
Leave a clearance of at least 1cm between the fireplace recess and the surround of the fireplace to
ease installation.
The electric fireplace does not need a flue.
Warning
1. The power socket shall be AC230V/15A three-core socket with excellent earth, fuse and earth
leakage protection.
2. Note:
In order to avoid overheating, do not cover the heater. Do not scrape the plastic off the core of
fireplace or install the core directly on a soft surface. Otherwise, it may block the air circulation and
cause fire accidents.
Install the electric fireplace in dry and safe places free from dust and flammable articles. Please
ensure that objects such as curtains not to block the outlet.
3. It is possible that the flames become lower when the heating function is switched on. This can be
prevented by placing the surround 10 mm from the wall.
Reminder
1. It is advisable to install the electric fireplace near the socket to ease electric installation.
2. First place the electric fireplace on the selected position to see whether it is satisfactory.
3. This electric fireplace is not allowed to be installed directly onto a wall. Place the mantel in the
desired location or build a fireplace recess in the desired location on the floor near the wall. The
size of the recess should be:
Model
MF1530H
MF1510H
When placing the fireplace or building the wall structure, please place the insert in dry, safe
and clean place.
4
Specification of The Opening
W
H
D
45.0cm
66.0cm
26.0cm
63.5cm
68.5cm
26.0cm