Jinbei HD-2 Max Anleitung Seite 35

Basic function setting menu
Sleep mode
Touch the box to the right of the "sleep" symbol on the screen, high-
light the selection box, click the up and down arrow symbols to ad-
just the sleep time "1.5/20" minutes, press the OK symbol to confirm.
The automatic shutdown time changes with the sleep time.
– Sleep time 1.5 minutes (automatic shutdown time 20 minutes)
– Sleep time 20 minutes (automatic shutdown time 40 minutes)
SYNC-X
Touch the box to the right of the "SYNC-X" symbol on the screen,
highlight the selection box, click the up and down arrow symbols to
set the Sync-X mode to "ON" or "OFF".
Note: The Sync-X function is used for better synchronisation of
camera and flash during continuous shooting. To avoid compatibi-
lity problems, the Sync-X function should be set to "OFF" when not
needed.
Function Description
Touch the Setting symbol on the screen to
enter the basic function setting interface.
Backlight
Touch the box to the right of the "backlight" symbol
on the screen, and click the up and down arrow
symbols to adjust the screen brightness value, "1 / 2 /
3 / 4 / 5", the OK symbol to confirm.
35