Jinbei HD-2 Max Anleitung Seite 31

GR: The Group can be chosen between A / B / C / D / E / F.
Flash modes
TTL Flash compensation adjustment: ± 3.0.
M
Power adjustment range: 1.0 – 9.0, click the screen value sym-
bol to adjust the power in whole f-stops and the up and down
arrows to adjust the power in 0.1 f-stops.
–– The current group is set to off. When the flash is triggered syn-
chronously, the group will not flash.
Modeling lamp
Modeling lamp status symbol: „0" means off | "P" means that
the brightness of the modeling light is automatically adjusted
in proportion to the flash output | "1 / 2 / 3" means manual ad-
justment of 3-level brightness of modeling lamp.
Synchronization modes
Tap the symbol to set the flash synchronization mode
Front curtain synchronization
Rear curtain synchronization
High speed synchronization
Zoom of flash head
Tap the symbol, tap again or tap the up and down symbol to
set the zoom position of the flash head: „AO" means auto zoom,
manual zoom means „0" / „1" / „2" / „3" / „4" / „5".
Master flash flashes: When this symbol is visible, the built-in
flash fires in master mode.
Master flash does not flash: When this symbol is visible, the
built-in flash does not fire in master mode.
Function Description
31