Introduction; Product Description; Intended Use; Symbols - Meec tools 011229 Bedienungsanleitung

Table of contents
1 Introduction
1.1 Product description .............................................41
1.2 Intended use ..........................................................41
1.3 Symbols ...................................................................41
1.4 Product overview ...............................................42
2 Safety
2.1 Safety definitions ................................................42
2.2 General safety instructions ..........................42
2.3 Work area safety ................................................42
2.4 Electrical safety ..................................................42
2.5 Personal safety ...................................................43
2.6 Power tool use and care ................................43
2.7 To use and handle cordless products .....43
2.8 Service ....................................................................44
2.9 Causes of kickback and ways to prevent it
44
2.10 Safety instructions for operation .............44
2.11 Personal protective equipment .................45
2.12 Safety devices ...................................................45
2.13 Battery safety .....................................................45
2.14 Safety instructions for maintenance ......46
2.15 Vibration safety .................................................46
3 Assembly
3.1 To assemble the bar and the chain ...........46
3.2 To fill with saw chain oil ................................. 47
3.3 To install the battery ........................................ 47
3.4 To remove the battery ..................................... 47
4 Operation
4.1 To use the product ............................................. 47
4.2 To start the product ......................................... 47
4.3 To do a check of the battery status .......... 47
4.4 To operate the product ...................................48
4.5 To stop the product ..........................................48
4.6 After use .................................................................48
4.7 Basic working technique ...............................48
4.8 Tree felling ............................................................48
5 Maintenance
5.1 To clean the product .........................................49
5.2 To tension the chain .........................................49
5.3 To clean the slot in the bar ...........................49
41
5.4 To file the chain ..................................................49
41
6 Transport
7 Storage
8 Disposal
8.1 To discard the product .....................................49
42
9 Troubleshooting
10 Technical data
1

Introduction

1.1 Product description

The product is a battery-powered chainsaw.

1.2 Intended use

The product is intended for cutting trees and sawing wood
in private gardens. Do not use the product for other tasks.
The product must only be used for its intended purpose and
in accordance with these instructions. All other use is
considered to be unsuitable. The manufacturer cannot
accept liability for personal injury and/or material damage
resulting from improper use. The full responsibility for any
such personal injury and/or material damage rests on the
user.

1.3 Symbols

46
47
49
Warning!
Read the operating instructions carefully
and make sure that you understand the
instructions before you use the product.
Save the instructions for future reference.
Wear approved safety equipment.
Wear protective gloves.
Wear protective boots.
Do not expose to rain or wet conditions.
49
49
49
50
51
2022_001