Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3
Place of installation
The place of installation must conform to all applicable technical and health standards. Position the appliance in a dry, well ven-
tilated place. In particular:
– Do not position the appliance near sources of heat (radiators, ovens, cookers, etc.) or in draughts.
– Do not expose the appliance to direct sunlight.
When installing a i.Am appliance as a replacement for an older product, perform the following checks:
– Check that the electrical power supply has been installed by a qualified electrician in conformity to applicable standards
– Check that the place of installation conforms to all applicable technical and health standards.
m
IMPORTANT!
To ensure optimal functioning of the appliance, the place of installation must conform to the fol-
lowing conditions:
– ambient temperature = 30°C
– RH (relative humidity) = 55%
– climate class = 4.
m
IMPORTANT!
In installations at altitudes over 900 metres (2950 feet), a compensation valve must be SPECIFIED AT
THE TIME OF ORDER for each double glazed compartment.
d
STOP!
– Do not use the appliance in places where there is a risk of fire/explosion due to the presence/
development of dusts, gases or flammable mixtures.
– Do not store flammable materials inside or near the appliance.
– Do not expose the appliance to the weather.
m
IMPORTANT!
Bear in mind the space necessary to access the various safety/control devices and power plug, also
the space needed for maintenance and proper ventilation (see Fig. 7).
8
EN
Werbung
Inhaltsverzeichnis
