Change Of Hinge Side - W32 - Nordcap W 32 Compact Bedienungsanweisung

Change of hinge side - W32

The door can be changed from right-hinged to left-hinged and vice versa as follows:
1. Rubber cover 2. Screw 3. Decorative cover 4 & 7 .Screw
5. Top hinge module 6.Door 8.Lower hinge module-Left 9.Cabinet's leg long
● Pull out the screw covers and unscrew
the decorative cover. See fig.7.1
● While holding the door firmly, loosen and
remove the top hinge, lift up and remove
the door. See fig.7.2
● Unscrew the lower hinge(8)
● Remove the long cabinet leg (9) on the
left side, and shift it to the right end side.
See fig.7.3
fig. 7.1
fig. 7.3
● Install the lower hinge and tie it with the
bolts.
● Install the door on the axe of lower hinge
(8) the same way it was removed, screw
back the top hinge on the left.
● Fix back the decorative cover and rubber
cover.
26
GB
fig 7.2
fig. 7.4