Nordcap WINE BLACK FIT SLIM Bedienungsanweisung Seite 10

4 Installation
4.1 Moving
Proceed as follows to remove the packaging from the appliance
– Move the appliance near the place of installation
– Steer the forks (1) of the pallet transporter under the appliance and lift it just clear of the floor
– Remove the screws (2) from all the corner panels (3) and remove the corner panels from the pallet
– Lower the appliance to the floor and carefully manoeuvre it clear of the forks of the pallet transporter
1
– Unscrew the screws (6) and remove the two cross plates (7) from the pallet
– Very carefully tilt the appliance to the left and remove the right side of the pallet (8)
– Lower the appliance to the floor again, taking care not to damage the feet or the bottom
– Tilt the appliance to the right and remove the left side of the pallet (9).
5
a WARNING!
While moving the appliance, take great care to prevent it falling over.
2
3
4
10
1
7
EN
Fig. 8
6
Fig. 9