Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Place the selected pasta template P1 on the M4 screw conveyor. Tighten lock M5 to M3. Note: Do not
•
tighten the lock nut too hard. Attach the assembled machine to the multifunction head. Proceed in the
same way as described in the "Meat grinder" section.
•
Attach the M2 bowl to the M3 machine funnel.
•
Connect the robot to the mains. Select 3 – 6 speed.
•
Insert the dough, pre-cut into strips, into the funnel of the machine. Use the tamper if required. The
machine will push out the pasta in the desired shape.
WARNING: Never use your fingers to push the mixture into the machine.
WARNING: Do not let the appliance running continuously for more than 10 minutes. Allow it to cool for at least
30 minutes before starting again.
Grating and cutting vegetables
V1
Tamper
V2
Grater machine with funnel
V3
Fine grater
V4
Coarse grater
V5
Slicer
•
Insert the selected attachment (fine grater V3, coarse grater V4 or slicer grater V5) into the grater V2 (see
figure PG1).
•
Attach the assembled machine to the multifunction head (see figures PG2, PG3). Proceed in the same way
as described in the "Meat grinder" section.
•
Place a suitable container under the grinder outlet.
•
Cut the potatoes or other vegetables into pieces that are the same size as the grater feed.
•
Connect the mixer to the mains and set the speed to 3-5.
•
Use tamper V1 to push the vegetables into the funnel of the machine (see figure PG4).
WARNING: Never use your fingers to push the mixture into the machine. Be careful not to injure yourself when
handling the graters - the graters are sharp.
WARNING: Do not let the appliance running continuously for more than 5 minutes. Allow it to cool for at least
15 minutes before starting again.
14
Werbung
Inhaltsverzeichnis
