Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
DESCRIPTION OF THE CONTROL PANEL AND DISPLAY
Kitchen robot On/Off
1.
As soon as the mixer is connected to the power
supply, the display lights up and the mixer goes
into standby mode.
2.
If it is in standby mode without any action for
3 minutes, the display turns off and the mixer
enters hibernation mode.
3.
If you turn the control knob (3) in hibernation
mode, the display will light up again and the
mixer will go into standby mode.
Display of speed:
Use the rotary knob to select the speed (program).
The display shows the following:
Speed 01-02: "Kneading" LED is lit.
Speed 03-04: "Mixing" LED is lit.
Speed 05-06: "Whisking" LED is lit
Speed P: LED symbol "Pulse" is lit
Position 0: Power Off
Timer setting function:
Tap the clock icon and use the +/- buttons to set the desired operating time. Then use the speed setting button
(3) to select the desired speed level (1-6). The set speed will be shown on the display and the mixer will start.
When the set timer time expires, the robot stops automatically.
The program can be stopped at any time by turning the knob to the "0" position.
Using the mixer and tips
The mixer can be used to mix different types of food. With this accessory you can prepare soups, sauces,
milkshakes, baby food, vegetables, drinks, desserts, purees, etc. Solid foods should be cut into small pieces.
Warning:
•
First, assemble the mixer and seat it properly in the multifunction head. Make sure that the lid is fitted
correctly. Only then connect the mixer to the mains and start the program.
•
If you need to remove the mixer bowl from the arm, first switch off the mixer and wait for the blade unit to
stop and disconnect the appliance from the mains.
•
Do not remove the lid while the blender is running.
•
Use the filling hole in the lid to add ingredients.
•
We recommend setting the speed to 4-6 (or P-pulse).
•
Do not add hot food above 80° C to the mixer.
•
The maximum volume of liquid in the mixer is 1.5 l.
WARNING: Do not remove the mixer jar or lid during operation.
•
•
WARNING: Do not leave the appliance running continuously for more than 3 minutes. Allow it to cool for
at least 6 minutes before starting again. Do not exceed a total operating time of 15 minutes.
10
Werbung
Inhaltsverzeichnis
