Makita DMR201 Bedienungsanleitung Seite 9

player to ensure an adequate signal and then adjust
the volume on the speaker for comfortable listening.
3. To have the better sound quality, we recommend
setting the volume to more than two-thirds level on
your audio device and then adjust the volume on the
speaker as required.
Note:
When Aux in socket is connected an audio device, the
speaker will be switched from Bluetooth to
mode. You can also press the source button to select your
desired mode.
Using USB memory devices
Important:
1. Your speaker is only designed to work with USB flash
memory devices. It is not intended to be connected to
hard disk drives or any other type of USB device.
2. It is possible to use SD or SDHC cards for media
playback when held in a suitable USB adaptor.
However, due to the wide variation of such adaptors,
it is not possible to guarantee that all adaptor/card
combinations will work with the speaker.
3. The speaker has been tested with a range of USB
memory devices of up to 32GB capacity. It supports
USB 2.0 full speed and USB 3.0. (Note: when using
USB 3.0, please allow the speaker to detect the device
for a longer period of time.)
4. USB memory must use the FAT or FAT 32 filing system
in order to operate with the speaker, it does not support
NTFS.
5. Audio formats supported for playback are MP3,WMA
and AAC. Playback does not support files encoded
using WMA lossless, WMA Voice, WMA 10
professional, nor files of any format which have DRM
protection.
Cautions:
1. In order to minimize the risk of damage to your speaker,
your USB Memory, please place the speaker such that
the device cannot easily be knocked while it is inserted
in the socket.
2. Remove the USB before carrying the speaker or if not
using the USB feature for a prolonged period.
3. Turn off the speaker before removing your USB
memory device.
4. The USB connection is intended only for flash memory
devices. The use of hard disk storage media is not
supported.
5. Playback via USB files stored on MP3 players is not
guarantee.
6. Large file size or high memory USB device takes longer
time to read.
Playing files from USB memory devices
1. Open the battery cover and insert the USB memory
device into the USB slot which is located in the battery
compartment.Close the battery cover.
2. Press the Power button
USB indicator turns amber indicating the speaker is in
USB mode. The speaker will then start playing from the
USB memory device.
Note: Once the USB memory device is plugged in,
auxiliary input
to turn on the speaker and
the speaker will automatically enter in USB mode. You
can also press the source button to select your desired
mode if needed.
3. To pause playing, press the Play/Pause button
resume playing, press the Play/Pause button
Note:
a) If you turn off the speaker , the next time the speaker is
turned on, it will resume to the last played track.
b) If you switch to other mode when playing from the USB
memory device, playback will be paused. When you
switch to the USB mode again,playback will resume
from the point where it was paused.
c) It is recommended to store only music files (MP3/WMA/
AAC) in your USB memory device.If there is one folder
contains file(s) other than music files, your speaker will
skip this file/folder.
Selecting a file
1. While the USB memory device is playing, press either
the Next track button
to change to the desired file. If there's more than one
folder, all files in the current folder should have been
played and the next folder will be played.
2. Press and hold the Next track button
button
Release the button when the desired point in the track
is reached.
To skip to another folder
With the USB memory device is in pause or play mode,
press and release the Next folder button
folder button
folder will be played.
Note:
If your USB contains a folder without files, the device will
skip the folder and play the files in the next folder.
MAINTENANCE
CAUTION:
• Never use gasoline, benzine, thinner, alcohol or the
like. Discoloration, deformation or cracks may result
8 ENGLISH
or Previous track button
to fast-forward/Rewind the current track.
. The first file of the next or previous
. To
again.
or Previous
or Previous