Makita DMR201 Bedienungsanleitung Seite 5

6. Do not store the tool and battery cartridge in locations
where the temperature may reach or exceed 50
°C(122°F)
7. Do not incinerate the battery cartridge even if it is
severely damaged or is completely worn out. The
battery cartridge can explode in a fire.
8. Be careful not to drop or strike battery.
9. Do not use a damaged battery.
10. To avoid risk, the manual of replaceable the battery
should be read before use. And the max discharging
current of the battery should be greater than or equal
to 8A.
11. The contained lithium-ion batteries are subject to
the Dangerous Goods Legislation requirements. For
commercial transports e.g. by third parties, forwarding
agents, special requirement on packaging and labeling
must be observed.
For preparation of the item being shipped, consulting
an expert for hazardous material is required. Please
also observe possibly more detailed national
regulations.
Tape or mask off open contacts and pack up the
battery in such a manner that it cannot move around
in the packaging.
12. Follow your local regulations relating to disposal of
battery.
13. Use the batteries only with the products specified
by Makita. Installing the batteries to non-compliant
products may result in a fire, excessive heat,
explosion, or leak of electrolyte.
CAUTION:
• Danger of explosion if battery is incorrectly replaced.
• Replace only with the same or equivalent type.
• Only use genuine Makita batteries. Use of non-
genuine Makita batteries, or batteries that have been
altered, may result in the battery bursting causing
fires, personal injury and damage. It will also void the
Makita warranty for the Makita tool and charger.
Tips for maintaining maximum battery life
1. Charge the battery cartridge before completely
discharged. Always stop tool operation and charge the
battery cartridge when you notice less tool power.
2. Never recharge a fully charged battery cartridge.
Overcharging shortens the battery service life.
3. Charge the battery cartridge with room temperature
at 10 °C - 40 °C (50 °F - 104 °F). Let a hot battery
cartridge cool down before charging it.
4. Charge the battery cartridge if you do not use it for a
long period (more than six months).
Explanation of general view (Fig.1)
1. Battery compartment locker
2. Mobile (Cell phone) placing panel
3. Bluetooth pairing button
4. Volume down button
5. Volume up button
6. Next folder button
7. Next track button/Fast-forward button
8. Volume max. or min. indicator/ Low battery indicator
9. Bluetooth indicator/Aux in indicator/USB indicator
10. Previous track button/ Rewind button
11. Previous folder button
12. Power button
13. Source button
14. Play/Pause button
15. Speaker
16. Handle
17. DC in socket
18. Auxiliary input socket
19. USB charging socket
20. Mobile storage cabinet cover
21. Cable hole
22. Mobile (Cell phone) storage cabinet
23. 14.4 V/18V battery terminal
24. 10.8 V-12Vmax battery terminal
25. USB playback socket
26. Battery cover
27. Battery cartridge
28. Button
4 ENGLISH