Preset Programs - MTR+ Rehalito Bedienungsanleitung

Preparations:
Make sure that Rehalito is switched off. Cleanse the area of the skin which is to be treated
with clean water. Following that, make sure that all plugs are completely connected to the
respective electrode sockets as well as device sockets. Place the vaginal-/rectal-probe or the
adhesive electrodes onto the area that has been cleansed, according to the advices in pages 23-
25 of this manual.
Rehalito is operated by a 9 volt block battery. Open the battery compartment at the back by
pushing down the lid and insert the battery by hand. Please ensure the correct polarity in
accordance with the markings. Rehalito is now operational.
If the battery voltage is too low, the battery-symbol in the LCD-display will flash. Please replace
the battery at this time. Empty batteries are special waste and therefore have to be disposed off
at an appropriate collection point or recycled. Never dispose of batteries via domestic or
household waste.
Adjustment:
1. Press the button „On/Off" once.
Rehalito is now switched on. The program used last, appears on the LCD-display. Program
parameters will be displayed as well as the treatment mode and the total treatment time.
Total Running
Time
Frequency
Mode
Rehalito Bedienungsanleitung / Operators Manual

Preset Programs (01 - 04)

34
Pulse Width
Low Battery
Indicator
Program