Function Description - Giropes Baxtran OPTIMA PTO Benutzerhandbuch

key test.
F5.2 Display screen test
All strokes of meter display will have self-inspection, to observe whether there is lacks of strokes.
Press
F5.3 Display current internal code
The display will show internal code of current instrument after smoothing. Press

7. FUNCTION DESCRIPTION

WEIGHT MAINTENANCE FUNCTION F2.1 = 1
Operation method
In normal weighing state, press
indication lamp is on. Only when weight setting value≥F2.2 is displayed, weight maintenance operation is effective. Otherwise, it will
return to weighing state after invalid operation information [--no--] is shown for a second.
If weight is in locked state, press
lamp is off.
If it is in weight locking state, refuse to remove skin, clear skin and setting operation.
PERCENTAGE DISPLAY F2.1 = 2
Display specification
Display [Pr 20.5], representing 20.5 %.
Pr = current actual weight / range ×100%.
Press to display switch in percentage and weight.
CHECK WEIGHT AND SELECTION SCALE FUNCTION F2.1 = 3
Function description
Set parameters such as F2.2 = A, F2.3 = B, F2.4 = C and F2.5 = D.
When display weight is X.
If X ≤ A, do not conduct check weight and selection.
If X < (B – D), it lacks of weight, and the display flickers.
If (B – D) ≤ X ≤ (B – C), it is qualified and the display has normal display
If X > (B – C), it is overweight and the display flickers.
Acquisition of target value
Press long until the display shows [TARGET], and then press
If F2.6 = 0, press
If F2.6 = 1, the display shows [000000], to request manual change of target value. After change, press
and quit setting interface.
FUNCTION OF ACCUMULATION SCALE F2.1 = 4
Operation method
In normal weighing state, when the scale is in , add weight to the scale and press
[Add--] progress bar, it indicates that the current display weight is included accumulated value, and then it returns to normal weighing
state. If the display shows [--no--] for a second, and returns to the normal weighing state, it indicates operation is invalid. Reason:
16
or to quit test of display screen.
on the operation panel, the will instrument lock display weight of the current scale, and "Hold"
again to cancel locking of weight and return to normal weighing state, and "Hold" indication
, the instrument will take the weight on current scale as the new target value and quit the setting interface.
USER'S MANUAL OPTIMAPTO
or
to show current target value and flicker.
on operation panel, if the display shows
EN EN
to quit the interface.
to save setting data