F2 Application Function Setting - Giropes Baxtran OPTIMA PTO Benutzerhandbuch

F1.13 Overload Display Range
Selectable Parameters: 9d, 5% (default value), 10%, 20%
F1.14 F1 Menu Protection
Selectable Parameters: 0 ---- Enter F1 menu by keyboard operation
F1.15 Steady-state filer choice
Set the parameters for the steady-filter.
F1.16 Restoring Factory Default
Set the parameters within F1~F4 as the defaults, which can't impact the parameters of standard scale.

F2 APPLICATION FUNCTION SETTING

F2.1 Function Selection
Selectable Parameters: 0 ---- Close the application functions (default value)
REPORT
---------------------------
Gross
State
14
1 ---- Enter F1 menu by pressing the calibration button
1 ---- Weight keeping function
REPORT
---------------------------
Gross 0.200 Kg
Tare 0.000 Kg
Net 0.200 Kg
2 ---- Percentage display function
3 ---- Weight checking and sorting function
---------------------------
1.980 Kg Gross
Less State
4 ---- Accumulative scale function
REPORT
---------------------------
1 0.200 kg
2 0.175 kg
3 0.347 kg
4 0.375 kg
---------------------------
Total: 1097Kg
REPORT
---------------------------
Gross 0.200 Kg
Tare 0.000 Kg
Net 0.200 Kg
REPORT
---------------------------
Gross 25.000 Kg
Status Hold
REPORT
25.000 Kg
OK
REPORT
---------------------------
Total 1.097 Kg
Parameter 4.2.3 in 1
USER'S MANUAL OPTIMAPTO
REPORT
---------------------------
Net 25.000 Kg
Status
REPORT
---------------------------
Net 25.000 Kg
State Over
Parameter 4.2.3 in 0
EN EN
Hold