Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1 - INSTALLATION AND WARNING NOTES
WARNING
THIS SYMBOL INDICATES THAT ONLY AUTHORISED AND TRAINED TECHNICIANS SHALL CARRY OUT THE
OPERATION:
Trained and skilled operator, aware of risks involved and responsible of adopting all measures necessary to minimise any possible
damage to himself or other people.
1.
Remove the packaging from the equipment.
2.
Check that the appliance has not been damaged during transport.
3.
Remove the wood pallet.
4.
Clean up the appliance (inside/outside) as specified in PERIODIC MAINTENANCE.
5.
Do not place the appliance outdoors and do not expose it to rain: external environmental conditions for the smooth operation of the appliance
are specified in TECHNICAL DATA plate placed on the appliance.
6.
Put the appliance on a flat surface; for proper operation, the appliance shall be perfectly levelled:
7.
Put the appliance in a ventilated place, far from heating sources (heaters, kitchens) and protected from sum beams. For the lighting of the
installation area, the use of fluorescent lights is recommended.
8.
Leave a space of at least 10 cm from walls.
9.
Do not leave objects on the appliance, such as containers, plants, etc. and leave at least 50 cm of free space above the appliance.
10.
The appliance can be equipped with a lock for the door closing (optional). In this case, keep the lock keys out of reach of children.
11.
Do not touch the operating appliance with bare feet or wet hands.
12.
The use of this appliance by children or people with physical, sensory, mental or physical disabilities or people who do not have the knowledge
and experience needed could create dangerous situations. The people responsible for their safety must give explicit instructions or check the
use of the appliance;
13.
Make sure that children do not play with the appliance.
DO NOT MOISTEN ANY PART OF THE BOX CONTAINING ELECTRIC COMPONENTS.
DO NOT FORCE ANY PART CONTAINING COMPONENTS OF THE REFRIGERATING CIRCUIT.
DO NOT INSTALL THE EQUIPMENT IN ATMOSPHERES SUBJECT TO RISK OF FIRE OR EXPLOSION, OR RADIATIONS.
Check that the real mains voltage corresponds to the one specified in the technical data plate.
The power supply line/socket for the refrigerator connection shall be properly protected and connected to the main
ground system, according to the regulations in force (e.g. high-sensitivity magneto-thermal differential switch In = 16
A , Id = 30 mA).
All-poles disconnect device must be present on the side of the installation with a spacing of the contacts of at least 3
mm.
THE APPLIANCE GROUND SYSTEM IS A SAFETY STANDARD AND MOREOVER, IT IS REQUESTED BY THE
LAW. OUR COMPANY HAS ARRANGED THIS CONNECTION ACCORDING TO THE REGULATIONS IN
FORCE; THEREFORE, THE COMPANY CAN NOT BE HELD LIABLE IN CASE OF DAMAGE TO PEOPLE AND
PROPERTY.
Do not use reducing devices, multiple plugs or cable extensions; ensure that the electric installation and power supply
plug capacity comply with the regulations in force and they are indicated for the equipment power, according to the
data specified in the plate. In case of doubt, for the purpose of periodic check of general safety of equipment and
users, contact only qualified and professional technicians.
WARNING
CONNECTION TO THE ELECTRIC NETWORK
10
Werbung
Inhaltsverzeichnis
