plastia urbalive Benutzerhandbuch Seite 11

English
TIP
in the bottom of the deep strainer (C), there are longitudinal grooves
in which the variable ribs (B) can be set in various ways. The farther
away from the center the ribs (B) are placed, the larger space is
formed in the middle of the deep strainer (C).
2) insert the deep strainer with the variable ribs (C+B) into the plant saucer (D)
3) arrange the vegetables into the deep strainer between the ribs (C+B), and
4) add water up to the mark indicated on the inner side of the deep strainer (C)
5) change water every day and replenish as necessary
6) as soon as new plant tops appear, you can process them
Growing microgreens
Assembling the microgreens kit with perlan
(it is cellulose fiber, which is suitable for growing microgreens
in direct contact with the seeds)
7) insert the deep strainer (C) into the plant saucer (D)
8) insert the shallow strainer (B) into the deep strainer (C)
9) place perlan onto the shallow strainer (B)
10) spray water onto perlan to make it wet
11) pour seeds to spread them evenly all over the perlan surface
12) if you use your own seeds, we recommend you to use about 5 g for
the surface of the shallow strainer (B) (approximately a full teaspoon) and
cover them with the cap (A)
13) bedew the seeds regularly, several times a day about 2-4x - maintain
perlan wet
14) after bedewing on the first days, always apply the cap (A)
15) as soon as the plant reaches the edge of the deep strainer (C), do not cover it
with the cap any more
16) on the 6th to 10th day, the plants will be ready for consumption, we
recommend you to trim them about 1 cm above perlan
17) to facilitate the trimming, you can withdraw the entire shallow strainer (B)
from the deep strainer (C)
18) the optimum temperature for germination and growth is +18 - 24 °C
19) perlan can be composted or disposed of by putting in a biowaste bin
Assembling the microgreens kit with gel
(it is a potassium-based substance that has excellent absorption
and antiseptic properties and food contact certification)
1) insert the deep strainer (C) into the plant saucer (D)
2) insert the shallow strainer (B) into the deep strainer (C)
3) pour gel into a container with a size of about 300 ml
4) cover the gel with about 170 ml of water
5) stir thoroughly
6) wait for 5 minutes until thick gel is formed
7) after the expiration of the time period, move the gel into a shallow
strainer (B)
8) spread the gel evenly in the shallow strainer (B) and smooth out the gel
9) evenly spread one packet of seeds onto the smoothed gel layer
10) if you use your own seeds, we recommend you to use about 5 g for
the surface of the shallow strainer (approximately a full teaspoon)
Follow the points below to continue growing
11) cover the kit with microgreens with a cap for about 48 hours, a
microclimate will be established inside the container, on the small plants, fine
hairs/capillaries = fine roots will appear
12) after 48 hours, remove the cap and expose the kit to natural light
13) the optimum temperature for germination and growth is +18 - 24 °C.
14) bedew the seeds regularly, several times a day about 2-4x - maintain gel wet
15) on the 6th - 10th day, the plants are ready for consumption, trim the
plants evenly at the top edge of the deep strainer
16) the gel with plant residues can be composted or disposed of by putting
in a biowaste bin
What does it mean when we say a product is made: with an
admixture of coffee grounds regranulate?
It means the final appearance of the product was created by mixing virgin
material with 10% coffee grounds regranulate, resulting in a grainy appearance
with slight colour variance.
Maintenance and Cleaning:
This product does not require any special maintenance. Wash all parts in warm
water using dish soap, rinse thoroughly and let dry. After use, thoroughly wash
the bowls and dry them. You can also wash the kit in a dishwasher up to the
temperature of 50 °C.
Material:
The product is made from a material suitable for food contact and is BPA FREE.
Disposal:
Have all of the product components disposed of in an environmentallyfriendly
manner. They must be disposal in accordance with the law.
Guarantee:
The product is guaranteed for the period of 24 months from the date of purchase.
The guarantee is granted only in eligible guarantee claims, i.e. in the cases of
material od manufacturing defects. The guarantee is claimable only when the
product is used according to the Instructions for use.
21