Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Important:
If you remove the product from the app, you must re-connect the product by following the above steps.
9.3 Operating and controlling via mobile app
Use the mobile app to remotely operate and control the product.
Important:
You will generally operate the product during nighttime. To operate the product during daylight, you
must cover the solar panel to simulate nighttime.
Important:
Whenever the light switches off, the mobile app connection will be disconnected.
P
:
RECONDITIONS
a
Mobile app and product have previously been connected.
a
The product is switched on. To check, cover the solar panel to confirm that the light switches on.
1. Open the mobile app.
2. Wait for the app and product to connect.
3. Use the functions in the mobile app to operate and control the product.
10 Troubleshooting
Error
Cause
The light does not turn on.
There is a nearby light source
which causes interference with
the product.
The light does not turn on.
The battery power is not suffi-
cient to light the product.
The light stays on for short peri-
Long periods of low sunlight (for
ods.
example cloudy weather or in
winter) will cause the re-
chargeable battery to recharge
less during the day.
The light stays on for short peri-
The rechargeable battery is old
ods.
and cannot store sufficient
charge.
11 Cleaning
Important:
– Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions. They damage
the housing and can cause the product to malfunction.
– Do not immerse the product in water.
1. Switch the product off.
2. Let the product cool down to ambient temperature.
3. Clean the product with a dry, fibre-free cloth.
4. Remove dust from the solar panel.
12 Maintenance
12.1 Replacing the rechargeable battery
Replace the rechargeable battery if the illumination time reduces significantly.
Important:
– Ensure no moisture enters the product.
– Never use a normal, non-rechargeable battery.
P
:
RECONDITIONS
a
You have a new rechargeable battery of the correct type as stated in the "Technical data".
1. On the solar module, unlock the latch.
2. Lift the solar module up.
3. Replace the old rechargeable battery with the new battery. Install the new battery in the same direc-
tion as the old one.
4. Close the solar module and lock it.
à
You have replaced the rechargeable battery.
Next step: Fully charge the rechargeable battery.
13 Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product in accordance with applicable regulatory
guidelines.
Remove any inserted (rechargeable) batteries and dispose of them separately from the
product. You as the end user are required by law (Battery Ordinance) to return all used (re-
chargeable) batteries. Disposing of them in the household waste is prohibited.
Contaminated (rechargeable) batteries are labeled with this symbol to indicate that disposal
in the domestic waste is forbidden. The designations for the heavy metals involved are: Cd =
Cadmium, Hg = Mercury, Pb = Lead (name on (rechargeable) batteries, e.g. below the trash
icon on the left).
You thus fulfill your statutory obligations and contribute to the protection of the environment.
4
14 Declaration of Conformity (DOC)
Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau hereby declares that this product con-
forms to the 2014/53/EU directive.
■
Enter the product item number in the search box. You can then download the EU declaration of conform-
ity in the available languages.
15 Technical data
15.1 Lamp
Battery power supply ............................ 1x 3.7 V,
Solar panel ............................................ 5 V, 1 W
Battery recharging time ........................ 5 h (with full sunlight exposure)
Battery life (approx.) ............................. 8 h (if fully charged)
Light colour ........................................... WW / CW / RGB
Colour temperature ............................... 2700 - 7000 K
Illuminant .............................................. LED
Illuminant replaceable ........................... No
Solution
Light activation threshold ...................... 8 lux
Place the product in darkness.
Light deactivation threshold .................. 30 lux
Luminous flux ....................................... 42 lm
Charge the rechargeable battery.
Protection class .................................... Class III
Ingress protection ................................. IP44
Charge the rechargeable battery.
Operating temperature ......................... -20 to +50 °C
Storage temperature ............................. -20 to +50 °C
Dimensions (W x H x D) (approx.) ........ 92 x 290 x 170 mm
Replace the rechargeable bat-
Weight (approx.) ................................... 290 g
tery.
15.2 Bluetooth module
Bluetooth version .................................. Bluetooth Mesh
Wireless frequency ............................... 2.402 - 2.480 GHz
Wireless range ...................................... 8 m
Wireless transmission power ................ 2.93 dBm
Click on the following link to read the full text of the EU declaration of conformity:
downloads
Li-ion rechargeable battery 18500,
1200 mAh
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2389430_V1_1121_jh_mh_en I2/O1
www.conrad.com/
Werbung
