Ec Declaration Of Conformity - Würth KNS 9-150-E Originalbetriebsanleitung

Repair
If in spite of careful manufacturing and test proce-
dures, the device becomes faulty, a repair by Würth
masterService should be arranged.
With any enquiries or spare parts orders, always
quote the item number as given on the device type
plate.
The latest spare parts list for the device is available
online at http://www.wuerth.com/partsmanager.
Alternatively, contact your local Würth agency for a
hardcopy.
Disposal
Do not dispose of this device with
household waste. Dispose of the device
via an approved waste disposal
company or via your local authority
waste disposal facility. Observe the
currently valid regulations. In case of doubt, contact
your waste disposal facility. Dispose of all packag-
ing in an environmentally compatible manner.
Warranty
We provide a warranty for this Würth device from
the date of purchase and in accordance with the
legal/country-specific regulations (proof of purchase
through invoice or delivery note). Damage that has
occurred will be corrected either by replacement or
by repair. Damage caused by improper handling is
not covered by the warranty. Claims under warranty
can only be accepted if the device is returned fully
assembled to a Würth agency, your Würth sales rep-
resentative or an authorised Würth customer service
workshop. Subject to technical changes without prior
notice. We accept no liability for printing errors.
22

EC Declaration of Conformity

We declare under our sole responsibility that this
product conforms to the following standards and
directives:
Standards
• EN 60745-1:2009 + A11:2010
• EN 60745-2-3:2011 + A2:2013
+ A11:2014 + A12:2014
• EN 50581:2012
in accordance with the regulations stipulated in the
directives:
EC Directive
• 2006/42/EC
• 2014/30/EU
• 2011/65/EU
Technical documentation at:
Adolf Würth GmbH & Co. KG, Abt. PPT
Reinhold-Würth-Straße 12 – 17,
74653 Künzelsau, GERMANY
F. Wolpert
Head of Product Man-
agement,
Authorised Signatory
Künzelsau: 07.08.2018
Dr.-Ing. S. Beichter
Head of Quality,
Authorised Signatory