Technical Data; Standard Delivery; Assembly; Putting Into Operation - Metabo BKH 400 WNB Betriebsanleitung

3

Technical Data

Table size
Overall height
Cutting height
Motor speed
Cutting speed
Vertical adjustment
Motor power
Operating voltage
Supply frequency
Protection by fuse
Emissionswert
Emission value while operating DIN 45635
Idling speed
Operating
Noise emission value
Iding speed
Operating
Weight
Stock-No.
4

Standard delivery

Circular saw blade 400 x 2,2 or 450 x 2,5 , chrome steel
Riving Knife DIN 38820 , size 50 x 3
Sawblad guard
Ripping fence
Mitre fence
Lifting eyes
Push stick
Tools for mounting saw blade and riving knife
Manual / Operation instructions
5

Assembly

For transport purposes the saw blade guard is fixed under the table and has to be assembled.
6

Putting into operation

6.1 Erection of the Machine
The machine must be firmly mounted at a flat and stable place. Tripping should be avoided.
6.2 Mains supply
- A three-wire cable connection socket with an earthing contact is needed for the mains supply according to VDE 0100 for
the model BKH 400/3,1 .
- For model BKH 450/5,5 respectively a five-wire cable connection with a CEE plug-in device according to VDE 0100 is
needed.
- Only a rubber cable H 07 RN-F 3 x 1,5 or 5 x 1,5 may be used as an extension cord.
- The plug to which the machine is connected must match the VDE regulation 0100.
- If used on a construction site, the VDE regulation 0100 part 704 must be obeyed.
6.3 Change of the Direction of Rotation of the saw blade
- On saws with 230 V single-phase current the direction
of rotation does not have to be checked or changed.
- On saws with 400 V three-phase-current the direction
of rotation has to be checked through switching on the
saw briefly (max. 1 sec). To change the direction of
rotation, the two connecting pins can be turned from
the outside. In order to do this you have to pull the plug
from the socket and press both pins inside with a 6 mm
blade screw driver, and then turn them.
- The switch can be protected from unauthorized use
with a padlock.
BKH 400/3,1 WNB
1000x660 mm
850 mm
127 mm
-1
2800 min
58,5 m/s
0-127 mm
3100 W
1~230 V
50 Hz
1x16 A
83,8 dB(A)
91,3 dB(A)
94,7
99,0
90 kg
010 400 3109
BKH 450/5,5 DNB
1000x660 mm
850 mm
140 mm
-1
2800 min
66 m/s
20 - 140 mm
5500 W
3~400 V
50 Hz
3x16 A
88,9 dB(A)
92,9 dB(A)
98,1
101,1
90 kg
010 450 5503