Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation instructions
3.4. Roof installation
Install the roof support slats and screw them to the wall elements.
Insert the roof elements and screw them to the roof support slats.
Observe the cable outlets.
3.5. Installing interior fittings
Mount the ventilation slide.
Mount the foot step (lower bench) and position it in the cabin.
Install the bench support slats.
Secure the bench screen.
Put the upper benches in place, and screw them to each other.
Install the infrared radiator and the radiator cover.
Please observe the installation instructions included with the infrared
radiator! The connection box for the infrared radiator must be at the top.
The writing on the glass of the infrared radiator must be legible.
Install the backrests.
Assemble the protection grille.
3.6. Installing the glass door
Mount the two door fittings on the glass door while checking that the alignment
of the fittings are straight and that the doors open outward.
The bottom drill hole of the door handle is 92.4 cm high.
The alignment of the fittings is achieved by adjusting / rotating both
plastic inserts.
3.7. Installing accessories
The door handles are screwed together from the inside.
Install the door magnet and sleeve plate.
Install the roof cover slats and the roof trim slats on the outside.
p. 10/10
Werbung
Inhaltsverzeichnis
