Panasonic TX-32LST506 Bedienungsanleitung Seite 19

EPG:
Press OK/► to enter the Program Guide menu.
Favourite:
Setup favourite channel list.
Channel Diagnostic:
Press OK/► to display some signal information on
the current digital channel, such as signal strength,
frequency, etc.
Channel Organizer:
This option allows you to organize channels.
System
Picture HDMI CEC Settings
HDMI Signal Format
Sound
Sleep Timer
Idle TV Standby
Channel
TV Placement
Environment
System
Shop Mode
Settings
HDMI CEC Settings:
CEC control: To select On or Off.
Device Auto Power Off: To select On or Off.
Tv Auto Power On: To select On or Off.
CEC Device List: Turn devices on and select [Enable]
to enable control of HDMI devices.
HDMI Signal Format: To select On or Off.
Sleep Timer: To select 15min, 30min, 45min, 60min,
90min, 120min or Off.
Idle TV Standby: To select After 1 hour of inactivity,
After 2 hour of inactivity, After 4 hour of inactivity, After
24 hour of inactivity or Off.
TV Placement: To select Desktop and Wallmount.
Environment: To select Home and Shop.
Shop Mode: To select E-Sticker.
Settings:
1. Lock: Click and lock the TV.
2. Power: Turn the Wake On Network and Network
Standby on or off.
3. Recording Storage: Put the storage device and
record the storage.
4. Privacy Notice: The content about privacy notice.
5. OSS License: The content about oss license.
The input
Press then press ▲/▼ to select your desired
source, and then press OK to confirm.
Off
Off
Desktop
Home
ATV
CABLE
ANTENNA
SATELLITE
AV
HDMI 1
HDMI 2
HDMI 3
Android TV Home
Channels setup
(ATV and CABLE)
Channels
Analogue setup
Set up your TV to receive broadcast signal.
Analogue setup: Select ATV and enter.
- Analogue Auto Tuning: Press OK to start the
automatic search process. The search may take a
few minutes.
- Analogue Manual Tuning: Press OK to enter the
interface.
Press ▲/▼ to set program, TV system or color system
item, then Press ▲/▼ select frequency and press OK
to search channel.
- Teletext Setup: Press OK and then use ▲/▼ to
select preferred teletext.
Digital Cable Tuning
Country or Region
Auto Tune
Manual Tune
LCN
Auto service Update
Digital Cable Tuning: Select Cable and enter.
Auto Tune: Press OK to start the automatic search
process. The search may take a few minutes. During
the process, you can press
to exit.
Manual Tune: Select the channel number and start to
scan
LCN: Select On or Off.
Auto service Update: Select On or Off.
Analogue Auto Tuning
Analogue Manual Tuning
Teletext Setup
Total Scanned: 0
On
On
and choose YES
19
English