Connecting The Tv - Panasonic TX-32LST506 Bedienungsanleitung

Connecting the TV

• Please ensure the TV is disconnected from the
mains socket/power point before attaching or
disconnecting any RF/AV leads.
• External equipment and cables are for illustrative
purposes only and not supplied with this TV.
• Check the type of terminals and cable plugs are
correct when connecting.
• When using an HDMI cable, use the fully wired one.
• Keep the TV away from electronic equipment (video
equipment, etc.) or equipment with an infrared
sensor. Otherwise, distortion of image/sound may
occur or operation of other equipment may be
interfered.
• Also read the manual of the equipment being
connected.
Terminals
Rear of the TV
1
2
3
1 USB 2.0 x 2
2 ETHERNET
3 SATELLITE IN
4
4 ANTENNA IN
5 COAXIAL
5
6 HDMI 1(ARC)
7 COMMON INTERFACE
8 HDMI 2
6
9 AV IN
7
10 HEADPHONE
8
9
10
Connections
Aerial
ANT
● Keep RF (aerial) cable away from the mains lead to
avoid and minimise mains interference pickup.
● Do not place the RF cable under the TV.
● An aerial, correct cable (75 Ω coaxial) and correct
terminating plug are required to obtain optimum
quality picture and sound.
● If a communal aerial system is used, you may
require the correct connection cable and plug
between the wall aerial socket and the TV.
● Your local Television Service Centre or dealer may
be able to assist you in obtaining the correct aerial
system for your particular area and the accessories
required.
● Any matters regarding aerial installation, upgrading
of existing systems or accessories required, and
the costs incurred, are the responsibility of you, the
customer.
● If the aerial is placed in the wrong location,
interference might happen.
Aerial
RF cable
11
English