Network Settings; Dismantling & Disposal - Kemper KHS CoolFlow Montage- Und Bedienungsanleitung

4.7 Special functions & language

Network settings

Sprache einstellen
5 Dismantling & disposal
Dismantling
Preconditions:
• The system is disconnected from the power supply.
• The lines are shut off.
1. Remove the PVC cover.
2. Remove the plug.
3. Disconnect the pipes.
4. Remove the shut-off devices.
5. Remove the legs.
Storage
Store the cold water chiller as follows:
• Packed
• In a dry and dust-free place
• Not outdoors
• Protected from heat and cold
• For storage over 3 months: Check the condition of the
components and packaging at regular intervals
1.
1.
Disposal
Observe the local regulations on waste disposal and
waste recycling.
The product must not be disposed of with normal house-
hold waste and must be disposed of properly.
Old batteries must not be disposed of with household
waste. You are required by law to bring batteries to a
suitable collection point.
Waste glycol must be disposed of properly in accordance
with the legal regulations.
© www.kemper-olpe.de – K410061000000-00 / 02.2022 – 51 /144
2.
2.