Manual Defrost - Polar FD169 Bedienungsanleitung

EN
7. Secure the hinge in place using the previously
removed screws.
8. Now the door handle is installed on the right
side.
Operation
Lock/Unlock the Door
Use the keys provided to lock/unlock the door.
Control Panel
The control panel is located on the front of the
appliance.
Caution: As a pharmacy fridge, the
controller has been pre-set optimally by the
manufacturer so we DO NOT recommend
customers make any adjustment to the
factory settings.
6
FD169_ML_A5_v1_20220517.indb 6 FD169_ML_A5_v1_20220517.indb 6
Turn On
1. Close the door of the appliance.
2. Connect the appliance to a mains power
supply.
3. Press the button to turn on the appliance.
Lock/unlock the keyboard
To lock/unlock the keyboard, press
buttons together for more than 3 seconds. Display
will show "POF" (locked) and "PON" (unlocked).

Manual Defrost

This appliance features an automatic defrost
function.
However, should the appliance require an additional
defrost period, press and hold
seconds to begin a manual defrost. The defrost
light illuminates.
How to see the set point
1. Press SET button once. The display will show
the set point value.
2. Press SET button again to exit, or just wait for
5 seconds to restore the normal display.
How to see the MIN temperature
1. Press button once.
2. The "Lo" message will be displayed, then
followed by the minimum temperature ever
recorded.
3. Press button again to exit, or just wait for
5 seconds to restore the normal display.
How to see the MAX temperature
1. Press button once.
2. The "Hi" message will be displayed, then
followed by the maximum temperature ever
recorded.
3. Press button again to exit, or just wait for
5 seconds to restore the normal display.
How to reset the MAX or MIN
temperature recorded
1. Press SET button for more than 3 seconds
while the MAX or MIN temperature is displayed.
2. Press SET button again to confirm and restore
the normal display.
and
button for 2
2022/5/17 13:57 2022/5/17 13:57