Motion CMD-03 Bedienungsanleitung Seite 10

Recharge the blind
To charge the blind, connect it to a standard USB-C 5V power supply via a USB-C cable.
This can be your iPhone's power adapter, for example.
LED light flashes
red during operation;
Charge the battery
10
Reset the connection
Hold the program button for 10 seconds to delete the connection between the blind and the app.
The LED lights up 5 times and the blind steps up and down 1 time to indicate that the connection is
reset. Now the blind can be reconnected.
LED light flashes
green;
battery is charging
LED light constantly
green;
battery is fully charged
5 x
10 s