Overload Protection - Bosch MUZS2FWW Gebrauchsanleitung

Perforated discs
The fine and the coarse perforated disc are
suitable for additional processing functions.
Juicer attachment
The juicer attachment is suitable for
squeezing soft fruit and vegetables, e.g.
berries, tomatoes, apples, pears, rose hips.
Notes
¡ Do not press fruit whose pips are similar
in diameter to the hole diameter in the
strainer insert, e.g. raspberries.
¡ Cook hard food before squeezing to
make it soft enough, e.g. rose hips.
Viennese whirl attachment
The Viennese whirl attachment is suitable
for shaping biscuit dough or shortcrust
pastry.
Grater attachment
The grater attachment is suitable for grating
hard foods, e.g. almonds, nuts, chocolate,
hard cheese or dry bread rolls.
Note: Only process dry nuts and almonds
in small quantities.

Overload protection

The overload protection system prevents
the motor and other components from be-
ing damaged through being overloaded.
If the meat mincer is overloaded or
blocked, the agitator paddle on the worm
gear will break at the predetermined break-
ing point.
Note: Spare parts with a predetermined
breaking point are not covered by our war-
ranty obligations. A new agitator paddle is
available from customer service under or-
der number 00418076.
Replacing the agitator paddle
Remove the faulty agitator paddle.
1.
Insert the new agitator paddle.
2.
1
Special accessory
Printed on 100% recycled paper
Controls
Preparing the base unit
Note: The food processor shown in the pic-
tures may differ from your model in terms of
shape and features.
Set up the base unit as described in the
1.
main operating instructions.
Press the release button and move the
2.
swivel arm down until it engages in the
vertical position.
→ Fig.
2
a The swivel arm is fixed in position 3.
Rotate the base unit to the operating po-
3.
sition.
→ Fig.
3
Inserting the seal
Insert the seal into the housing and
▶
press in firmly.
→ Fig.
4
The recesses must match up exactly.
Assembling the attachments
Note: To use the special accessory, you
need the parts of the meat mincer, except
for the knife and perforated disc.
Assembling the meat mincer
→ Fig. -
5 8
Assembling the juicer attachment
Follow the illustrated instructions.
→ Fig. -
9 13
Assembling the Viennese whirl
1
attachment
Follow the illustrated instructions.
→ Fig. -
14 17
Assembling the grater attachment
Follow the illustrated instructions.
→ Fig. -
18 21
Fitting the attachment
→ Fig. -
22 27
Overload protection en
1
1
13